Contentname:US_hacker_safe
|
|
 |
|
|
 Features
|
|
 MCRES-MICRO
|
New bracketry included as of 9-1-06
NEW: Effective August 30, 2006 the MCRes-Micro is shipped with a set of adjustable brackets to further facilitate installation of the product. See examples of installation below.
Introduction
The patent pending MCRES-MICRO is a small form factor reservoir designed to operate quietly and reliably with high flow pumps such as Swiftech's MCP350 and MCP655 models (3/8" and 1/2" lines). The patent pending design features an angled baffle forcing the turbulent flow at the bottom of the reservoir. This allows it to function without air entrainment at low fluid levels and affords extended usage without refills for approximately 2 years.
Features & Benefits
|
Features |
Benefits |
| Small size: 4 x 3 x 1.5" (100x76x38mm) |
Can be installed in most systems including many small form factor cases without sacrificing a CD-ROM bay. |
| Separated from the pump |
Can fit in smaller spaces than integrated pump/reservoir setups. |
| Anchoring ears, and velcro pads |
Easy to install against case panels, either with the supplied velcro pads, or permanently with screws. |
| NEW! Adjustable brackets |
Greatly facilitate installation and are adjustable in all 3 axis. |
| Specially designed for high-flow pumps |
No annoying sloshing sounds and completely free of any air entrainment even at the lowest possible operating levels. |
| Patent pending baffle design |
Approximately 24 month of continuous operations without refills (*) in 3/8" systems, and 18 months in 1/2" systems. |
| Cosmetic appeal |
Transparent acrylic panel construction. |
| Built-in reliability |
Stress related cracks found in other acrylic constructions is eliminated by design: straight NPSM threads do not induce stress compared to NPT (tapered) threads. |
| 1/2" and 3/8" barbs included |
Universal use with high flow systems. |
| Fill-port cap and NPSM barb fittings use O-ring |
Highest reliability thanks to O-ring seal. |
(*) Refills are necessary to compensate for the evaporation of the fluid through vinyl lines which are slightly porous. The above specifications are estimated from actual tests performed for a duration of 10 months, with a system composed of MCW6000 waterblock, MCR120 radiator and MCP350 pump, 6 feet of 3/8" vinyl tubing, and operating 24x7. | |
|
|
|
|
Specifications
|
Specifications
click on picture to enlarge
-
Material: Clear acrylic laser-cut panel
-
Dimensions: see schematic above
-
Maximum capacity: 4.5 fl oz (133 cc)
- Shipped with (2) each 3/8" and 1/2" barb fittings
- Recommended cooling fluid: distilled water + 5% Swiftech's Hydrx
|
Forum messages are not reviewed and may not contain accurate information about a product.
Message contents are opinions from customers based on their own experience with a product.
We do not recommend you make puchasing decisions based on Forum messages.
|
|
|
|
Customer Reviews
|
Product reviews on NCIXUS.com are not pre-screened and may not contain accurate information about the product. If there is a discrepancy, please use the
Report this Review link located beneath each review. Reviews are not an endorsement expressed by NCIXUS.com, but opinions from
customers based on their own experience with a product. We do not recommend you make purchasing decisions based on facts or opinions
expressed in these reviews.
|
 Rated by Hippey, August 6, 2008
I actually attached this with two zipties through the rear mounting holes and is holding it relatively straight. Its a cheap res and it performs the job admirably, the only reason this is getting 4 and not 5 is that the top fillport has been threaded with a outdated thread type and there is NO reason whatsoever that it couldn't be 1/4" NPT like the two ports.
» READ MORE
 Rated by Dashock, July 5, 2008
Works well and awesome took only a few minutes to get all the bubbles out of my system a lot easier then my previous system would defitnetely buy again! Good work Swiftech.
» READ MORE
Rated by kirk_c, April 24, 2008
The internal baffle works very well, so there's NO air entrainment from the reservoir. My system bled all the air out within 1/2 hour, including those fine, frothy little bubbles that hardly make any noise going through the pump.
» READ MORE
Rated by Edward_T, February 28, 2008
It's very sturdy but it's a bit on the small side. It looks great and the barbs that come with it are ok. But they are plastic so you might want to change them.
» READ MORE
Rated by Apollo4g, February 10, 2008
This res is great for the price. It small so it can fit almost anywhere in your case. It also comes with mounting hardware to make it easy for you to do so.
» READ MORE
Rated by Chris_G, January 30, 2008
what's more to say about this product that hasn't already been said? it's a fantastic reservoir. it's incredibly easy to use. you can get quite creative, due to the included mounting hardware, in how you would like to display it without resorting to direct modding. if you are new, or a vet, to liquid cooling, i highly recommend this product. it would have been nice if the kit included chrome barbs, but then again, that would have increased the very reasonable price.
» READ MORE
Rated by James_M, January 20, 2008
It is a good basic resevoir, I dont know what else you would want for $20, comes with all the fittings, and different ways to hold it in place including Velcro
» READ MORE
Rated by Varroa, January 16, 2008
nice res but the install hardware could use some work. The screws are too short and the washers are too tight but once you get it together it all works great!
» READ MORE
Rated by James_8970, November 28, 2007
This is a great quality reservoir that gets the job done. Keeps the air bubbles out of my pump for silent operation :)
This review was modfied by poster @ 11-28-07 06:37 PM
» READ MORE
Rated by crash2k, November 18, 2007
This is a good reservoir, quality is good and installation is easy ... except for the mounting bracket screws that are a bit short if you want to install like explained in the manual. Recommended buy ;-)
» READ MORE
|
|
|
|
Sales Policy
|
Products sold by NCIXUS.com are covered under a limited 25-day DOA (dead-on-arrival) policy, from the original invoice date, and is subject to the following terms and conditions:
- ALL merchandise requires an RMA number (Return Merchandise Authorization) issued by NCIXUS.com for return. RMA numbers are valid for 7-days with a small leeway for shipping times. Merchandise returned to us without a valid RMA number will be refused and shipped back to the customer at the customer's expense. Please allow 5 to 10 business days for testing and refunds to be processed.
- Returned merchandise must NOT be physically damaged, including damage due to improper installation or overclocking. This includes any physical alteration to the product, modifications not approved by the manufacturer, bent pins, etc. No returns, refunds or exchanges for any special order products, Notebooks, PDAs, Televisions, Retail Box Software, OEM Software, Computer Games, Video Games, DVDs, CDs, or any products marked as "no returns" or carries a similar description on the products' page. All products are eligible for original manufacturer's warranties. Please contact the manufacturer directly. All fees, including "shipping and handling", insurance coverage fees, and "Rapid Replacement" fees are non-refundable.
- Returns MUST include all original parts and packing materials and an NCIXUS.com RMA number, or the return will be rejected. NCIXUS.com reserves the right to refuse any returns or refunds for merchandise. DOA items may be returned within 25 days of ordering and may be subject to a 15% restocking fee at the discretion of NCIXUS.com.
- LCD monitors and other products with LCD displays (i.e.: notebooks, cameras, etc.) adheres to the dead-pixel policy that been established by most of the manufacturers. Any product with an LCD screen must be a minimum of 7 (seven) dead LCD pixels to be considered defective (DOA). Please contact the manufacturer of the product for additional warranty information if you receive a product with less than 7 dead pixels.
All product warranty coverage after 25-days will be handled directly by the product manufacturer. NCIXUS.com reserves the right to refuse any returns or refunds for merchandise.
Please read our RMA
& warranty policy and terms
& conditions for more information. If you have
any questions regarding our sales and warranty policies, please
send us a message -- we'll be glad to answer any of your questions.
|
|
|
|
Product Warranty
|
1 year limited warranty through NCIX.com.
|
|
|
|
|
Contentname:US_home-launch1
Contentname:US_home-launch2
Contentname:US_home-launch3
Contentname:US-biz-store
Contentname:US-quick-links
|
|
VIEW CART
USA
Canada