Contentname:US_hacker_safe
|
|
 |
 Features
- By David_W @Jan 16, 2008
|
G3/8" BSP 1/2" Fitting
3/8" BSP Threaded barb without rubber O-Ring - PTFE Tape required to seal. 2x fittings required per radiator.
|
|
|
|
Specifications
|
Forum messages are not reviewed and may not contain accurate information about a product.
Message contents are opinions from customers based on their own experience with a product.
We do not recommend you make puchasing decisions based on Forum messages.
|
|
|
|
Customer Reviews
|
Product reviews on NCIXUS.com are not pre-screened and may not contain accurate information about the product. If there is a discrepancy, please use the
Report this Review link located beneath each review. Reviews are not an endorsement expressed by NCIXUS.com, but opinions from
customers based on their own experience with a product. We do not recommend you make purchasing decisions based on facts or opinions
expressed in these reviews.
|
 Rated by David_P, June 5, 2008
No water cooled setup is complete with out some good barb fittings, and these babies do the job, don't forget the pipe tape to stop leaks
» READ MORE
 Rated by DaSb00ts, March 5, 2008
I bought these for my PA120.3 radiator and didn't have any problem with them. I prefer these to plastic barbs. Since no rubber o-ring is included, teflon tape is needed.
» READ MORE
Rated by Melton_L, March 5, 2008
So far they have been perfect. I purchased o-rings from a local Home Depot, and also used Teflon tape on the threads. The barbs do what they are supposed to do.
» READ MORE
 Rated by Varroa, February 25, 2008
Well as far as barbs are concerned these are my least favorite so far. Quality of the workmanship is below average and there are no "o" rings on these so you need teflon tape to seal them. If they weren't the only ones available for these rads then I wouldn't buy again.
» READ MORE
Rated by Kristopher_F, February 20, 2008
Worked well with my PA120.2; my only gripe is the size of the barbs. They are too small in my opinion to be used with 1/2 ID tubing. If you use these I recommend 7/16" tubing to be safe.
» READ MORE
Rated by BloodyLunatic, February 1, 2008
It the best barb fitting G3/8 you can find,it not the so so nylon bart fitting you can find in some other store,it chrome plated and fit to your thermochill radiator.
» READ MORE
Rated by Thomas_C, January 4, 2008
Definitely does it's job and fits the Thermochill radiators well, but the barb itself could stand to be a little tighter, expecially considering I used 7/16" tubing and it didn't feel nearly as tight as my other 1/2" barbs.
» READ MORE
Rated by David_C, January 1, 2008
I bought these for my PA120.3 radiator. Good thing I noticed they come individually or I would have only had one. They fit my Masterkleer hose really well, very tight, but I can still remove the hose if needed. This is important as I've found on the water pump the only way to remove the hose is to cut it. Great barb fittings.
» READ MORE
Rated by James_8970, November 27, 2007
Great fit on the PA120.3 radiator, just the small fault of not being quite as large as I had hoped, nothing a clamp won't fix.
» READ MORE
Rated by matt_v, November 22, 2007
Good product, a little pricey. and it would be nice if you could buy them in pairs, i ALMOST messed up then i saw it was just 1.
» READ MORE
|
|
|
|
Sales Policy
|
Products sold by NCIXUS.com are covered under a limited 25-day DOA (dead-on-arrival) policy, from the original invoice date, and is subject to the following terms and conditions:
- ALL merchandise requires an RMA number (Return Merchandise Authorization) issued by NCIXUS.com for return. RMA numbers are valid for 7-days with a small leeway for shipping times. Merchandise returned to us without a valid RMA number will be refused and shipped back to the customer at the customer's expense. Please allow 5 to 10 business days for testing and refunds to be processed.
- Returned merchandise must NOT be physically damaged, including damage due to improper installation or overclocking. This includes any physical alteration to the product, modifications not approved by the manufacturer, bent pins, etc. No returns, refunds or exchanges for any special order products, Notebooks, PDAs, Televisions, Retail Box Software, OEM Software, Computer Games, Video Games, DVDs, CDs, or any products marked as "no returns" or carries a similar description on the products' page. All products are eligible for original manufacturer's warranties. Please contact the manufacturer directly. All fees, including "shipping and handling", insurance coverage fees, and "Rapid Replacement" fees are non-refundable.
- Returns MUST include all original parts and packing materials and an NCIXUS.com RMA number, or the return will be rejected. NCIXUS.com reserves the right to refuse any returns or refunds for merchandise. DOA items may be returned within 25 days of ordering and may be subject to a 15% restocking fee at the discretion of NCIXUS.com.
- LCD monitors and other products with LCD displays (i.e.: notebooks, cameras, etc.) adheres to the dead-pixel policy that been established by most of the manufacturers. Any product with an LCD screen must be a minimum of 7 (seven) dead LCD pixels to be considered defective (DOA). Please contact the manufacturer of the product for additional warranty information if you receive a product with less than 7 dead pixels.
All product warranty coverage after 25-days will be handled directly by the product manufacturer. NCIXUS.com reserves the right to refuse any returns or refunds for merchandise.
Please read our RMA
& warranty policy and terms
& conditions for more information. If you have
any questions regarding our sales and warranty policies, please
send us a message -- we'll be glad to answer any of your questions.
|
|
|
|
Product Warranty
|
NCIX provides limited warranty for this product for 30 days after purchase.
|
|
|
|
|
Contentname:US_home-launch1
Contentname:US_home-launch2
Contentname:US_home-launch3
Contentname:US-biz-store
Contentname:US-quick-links
|
|
VIEW CART
USA
){kind=small}
){kind=small}
Canada