Advanced Search | Customer Care | NCIXUS Forums |
Newsletters | Contact Us | Your Account | VIEW CART  
 Welcome 
 Hot Deals 
 NCIX PC 
 Forums 
  CANADA |  USA
Shop by Brand  |  Shop by Category  |  Bestsellers  |  Latest Reviews  |  New Arrivals
Search
Hot Searches:
 
Swiftech 3/8IN X 5/8IN LOK-SEAL™ Compression Fitting G1/4 - Black
This product can only be exchanged or replaced with the exact same item.
Swiftech 3/8IN X 5/8IN LOK-SEAL™ Compression Fitting G1/4 - Black - 72219_l.jpg
Actual product may not be exactly as shown.
Swiftech
Reg. Price: $19.13  USD
On-Hand Availability:
In Stock

This item is in stock and will ship as soon as possible. Only a few left in stock! Order yours now (more are on the way).
Avg. Rating:
Share this:
Price Match
Add to your wish list
E-Mail to a friend
More from Swiftech
More Barbs & Fittings from Swiftech
Similar products
Print this item
Notify me

   SKU:  
72219
   Shipping Weight:   0.1 lbs
   Part #: 5-8x3-8-G1-4-CF-BK

Features    [ Edit | History ]

Product Description: 

 

?” x ?” Lok-Seal™ Compression Fitting

 

Contents & Features

Specifications

  • Blister pack of 1 fitting & collar
  • Material: brass
  • For ?” (10mm) ID x ?” (16mm) OD tubing
  • Finish: high polish chrome plating or black paint
  • G 1/4" Male threads
  • Hex nut:
    • Inch: 13/16"
    • Metric: 20mm
  • Collar:
    • Inch: .83"
    • Metric: 21mm
  • Hi-flow design: .40" (10.2mm) bore  ID x  .40" (10.2mm) barb ID

 

 

Dimensions

 

 

 

Recommended use

  • Initial Tip:  If possible, attach the fittings to the cooling devices first! While not mandatory,  it is always preferable to fasten a fittings to a cooling device prior to installing the device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
  • Fasten the fitting by hand until it mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in “finger tight” mating position may vary from one device to another depending on various factors.  Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.

 

  • For complete long-term safety and leak-free operations, Swiftech® recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:

Recommended Torque

Soft Material

Minimum

Maximum (*)

Acetal (POM) and acrylics

1/4 of a turn after initial contact between mating surfaces

1/2 of a turn after initial contact between mating surfaces

Hard Materials

Recommended

Copper, brass, aluminum

1/8 of a turn after initial contact between mating surfaces

(*) For full 5mm thread depth – please inspect the device threads prior to applying the maximum
recommended torque – when partial threads exist due to application necessity, only apply the
minimum torque.

 

Recommended Tools

A small adjustable wrench with jaw opening up to 1” (25.4mm)

may be used as a universal tool instead of the specific tools listed below

Specific tool sizes

Fitting

 

Inch Tube ID x OD

Metric Tube OD xID

Fitting base hex:

 

Flat wrench or socket

Collar:

 

Flat or adjustable wrench

?”x ½” – 13/10mm

Metric: 17mm - Inch: 11/16”

Metric: 18mm - Inch: adjustable wrench

?” x ?” – 16/10mm

Metric: 20mm - Inch: 13/16”

Metric: 21mm - Inch: adjustable wrench

½” x ¾” – 19/13mm

Metric: 24mm - Inch: 15/16”

Metric: 25mm - Inch: 1”

 


Recommend By
100%
Out of 6 Review(s)
5 star: (6) 
4 star: (0) 
3 star: (0) 
2 star: (0) 
1 star: (0) 

Patrick_M
08/12/14
 Verified Owner
definitely recommand it, the are really great looking, but the compression ring is a bit hard to screw into place ... (Read More)

kslay
02/06/14
 Verified Owner
I gave it a 1 star but ncix wouldn't post it or was taking to long. Read fully. Don't buy. Yes it's cheaper than other brands but I guess the old saying is true, "you get what you pay for". Once the tube is on, it is so hard to put on the compression nut. It won't even reach the threads to begin with. You have to use so much force that it is ridiculous. I was being so cautious when working on my rad so as not to crush the fans that are behind it. I used primochill advanced lrt 3/8 and 5/8. At first I thought perhaps the tubing was not made to proper size. So I tested it on a different brand quick disconnect and that went on like butter, stayed on too. Save your fingers buy another brand.

This review was modfied by poster @ 02-16-14 07:10 AM (Read More)

Fraser Cow
04/24/13
 Verified Owner
If you don't want to spend $100.00 on fittings, this is a really good option. (Read More)



Contentname:NCIX_Weekly_Special_Side  
Featured Brands:
Shop by brands
Your Order Company Info Memberships Services Hotlinks
Customer Care
Order Status
About NCIX
Contact Us
Careers
Terms & Conditions
Branding & Logos
Privacy Policy
NCIX Rewards
Premier Partner Reseller
Affiliate Program
NCIX Gift Cards
Online Price Match
NCIX Newsletters
Facebook
YouTube
Twitter
Forums
International Sites: United States Canada
Copyright© 2015 - NCIXUS.com/NCIXUS Technology Inc. All rights reserved.