Advanced Search | Customer Care | NCIXUS Forums |
Newsletters | Contact Us | Your Account | VIEW CART  
 Welcome 
 Hot Deals 
 NCIX PC 
 Forums 
  CANADA |  USA
Shop by Brand  |  Shop by Category  |  Bestsellers  |  Latest Reviews  |  New Arrivals
Search
Hot Searches:
 
Swiftech 1/2IN X 3/4IN LOK-SEAL™ Compression Fitting - Black
This product can only be exchanged or replaced with the exact same item.
Swiftech 1/2IN X 3/4IN LOK-SEAL™ Compression Fitting - Black - 72220_l.jpg
Actual product may not be exactly as shown.
Swiftech
Reg. Price: $9.99  USD
On-Hand Availability:
This Product is available in 3 to 6 weeks

This product is available but currently we do not have stock. Notify me if this product is available again.
Avg. Rating:
Share this:
Price Match
Add to your wish list
E-Mail to a friend
More from Swiftech
More Barbs & Fittings from Swiftech
Similar products
Print this item
Notify me

   SKU:  
72220
   Shipping Weight:   0.2 lbs
   Part #: 3-4X1-2-G1-4-CF-BK

Features    [ Edit | History ]

Product Description: 

 

½” x ¾” Lok-Seal™ Compression Fitting

 

Contents & Features

Specifications

  • Blister pack of 1 fitting & collar
  • Material: brass
  • For ½” (13mm) ID x ¾” (19mm) OD tubing
  • Finish: high polish chrome plating or black paint
  • G 1/4" Male threads
  • Hex nut: Inch 15/16" - Metric 24mm
  • Collar: Inch 1" - Metric 25mm
  • Hi-flow design: .40" (10.2mm) bore ID x .47" (12mm) barb ID

 

 

Dimensions

 

 

 

Recommended use

  • Initial Tip:  If possible, attach the fittings to the cooling devices first! While not mandatory,  it is always preferable to fasten a fittings to a cooling device prior to installing the device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
  • Fasten the fitting by hand until it mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in “finger tight” mating position may vary from one device to another depending on various factors.  Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.

 

  • For complete long-term safety and leak-free operations, Swiftech® recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:

Recommended Torque

Soft Material

Minimum

Maximum (*)

Acetal (POM) and acrylics

1/4 of a turn after initial contact between mating surfaces

1/2 of a turn after initial contact between mating surfaces

Hard Materials

Recommended

Copper, brass, aluminum

1/8 of a turn after initial contact between mating surfaces

(*) For full 5mm thread depth – please inspect the device threads prior to applying the maximum
recommended torque – when partial threads exist due to application necessity, only apply the
minimum torque.

 

Recommended Tools

A small adjustable wrench with jaw opening up to 1” (25.4mm)

may be used as a universal tool instead of the specific tools listed below

Specific tool sizes

Fitting

 

Inch Tube ID x OD

Metric Tube OD xID

Fitting base hex:

 

Flat wrench or socket

Collar:

 

Flat or adjustable wrench

?”x ½” – 13/10mm

Metric: 17mm - Inch: 11/16”

Metric: 18mm - Inch: adjustable wrench

?” x ?” – 16/10mm

Metric: 20mm - Inch: 13/16”

Metric: 21mm - Inch: adjustable wrench

½” x ¾” – 19/13mm

Metric: 24mm - Inch: 15/16”

Metric: 25mm - Inch: 1”

 


Recommend By
100%
Out of 4 Review(s)
5 star: (3) 
4 star: (0) 
3 star: (1) 
2 star: (0) 
1 star: (0) 

kirm
03/11/14
 Verified Owner
I bought eight of these for my new system. Before I was a ghetto watercooling builder using barbs and automotive hose clamps. They worked and worked well but I wanted a bit of bling. These delivered. I don't know what another reviewer here said about them not being black. I'll quote Spinal Tap: "How much more black could this be?"

(Read More)

RockstarX74
03/10/14
 Verified Owner
These look and feel of quality. If only they came in white or a UV blue! (Read More)

saunders1991
06/12/13
 Verified Owner
Using 8 of these in my rig, easily attached to MCR320, MCR420, and my Apogee HD, although did not fit side-by-side in my MCRES-Micro Rev 2, but that was fine really, I just used the barbs that come with my Apogee HD so it still looked nice and sleek. (Read More)



Contentname:NCIX_Weekly_Special_Side  
Featured Brands:
Shop by brands
Your Order Company Info Memberships Services Hotlinks
Customer Care
Order Status
About NCIX
Contact Us
Careers
Terms & Conditions
Branding & Logos
Privacy Policy
NCIX Rewards
Premier Partner Reseller
Affiliate Program
NCIX Gift Cards
Online Price Match
NCIX Newsletters
Facebook
YouTube
Twitter
Forums
International Sites: United States Canada
Copyright© 2015 - NCIXUS.com/NCIXUS Technology Inc. All rights reserved.