|
New bracketry included as of 9-1-06
NEW: Effective August 30, 2006 the MCRes-Micro is shipped with a set of adjustable brackets to further facilitate installation of the product. See examples of installation below.
Introduction
The patent pending MCRES-MICRO is a small form factor reservoir designed to operate quietly and reliably with high flow pumps such as Swiftech's MCP350 and MCP655 models (3/8" and 1/2" lines). The patent pending design features an angled baffle forcing the turbulent flow at the bottom of the reservoir. This allows it to function without air entrainment at low fluid levels and affords extended usage without refills for approximately 2 years.
Features & Benefits
|
Features |
Benefits |
| Small size: 4 x 3 x 1.5" (100x76x38mm) |
Can be installed in most systems including many small form factor cases without sacrificing a CD-ROM bay. |
| Separated from the pump |
Can fit in smaller spaces than integrated pump/reservoir setups. |
| Anchoring ears, and velcro pads |
Easy to install against case panels, either with the supplied velcro pads, or permanently with screws. |
| NEW! Adjustable brackets |
Greatly facilitate installation and are adjustable in all 3 axis. |
| Specially designed for high-flow pumps |
No annoying sloshing sounds and completely free of any air entrainment even at the lowest possible operating levels. |
| Patent pending baffle design |
Approximately 24 month of continuous operations without refills (*) in 3/8" systems, and 18 months in 1/2" systems. |
| Cosmetic appeal |
Transparent acrylic panel construction. |
| Built-in reliability |
Stress related cracks found in other acrylic constructions is eliminated by design: straight NPSM threads do not induce stress compared to NPT (tapered) threads. |
| 1/2" and 3/8" barbs included |
Universal use with high flow systems. |
| Fill-port cap and NPSM barb fittings use O-ring |
Highest reliability thanks to O-ring seal. |
(*) Refills are necessary to compensate for the evaporation of the fluid through vinyl lines which are slightly porous. The above specifications are estimated from actual tests performed for a duration of 10 months, with a system composed of MCW6000 waterblock, MCR120 radiator and MCP350 pump, 6 feet of 3/8" vinyl tubing, and operating 24x7. |
HardwareWiki.org Info
MCRES-MICRO
Rated by HisShadow, September 3, 2008
Rated by Andrew_L, August 28, 2008